250Y Metal Perforated-Plate Corrugated Packing: Large Specific Surface Area and High Efficiency

250Y Metal Perforated-Plate Corrugated Packing

250Y Metal Perforated-Plate Corrugated Packing is a mainstream high-efficiency structured packing used in distillation, absorption, and extraction units in petroleum chemical, coal chemical, fine chemical, and other industries. In the model designation, “250” represents a standard specific surface area of 250 m²/m³, and “Y” denotes the general-purpose perforated-plate corrugated structure. With the combined advantages of large specific surface area, high efficiency, low pressure drop, and resistance to fouling and durability, 250Y metal perforated-plate corrugated packing is an ideal choice that balances separation efficiency and operational stability.

250Y Metal Perforated-Plate Corrugated Packing250Y Metal Perforated-Plate Corrugated Packing
  1. Precision Structure and Material

Structural design: It is made from high-quality thin metal sheets of 0.15–0.20 mm (mainly 304/316L stainless steel; duplex steel and titanium can be customized), processed by precision stamping and perforation and corrugation rolling. The corrugation apex angle is about 90°, the flow channel inclination alternates between 30° and 45°, adjacent sheet flow channels are oriented at 90°, and upper and lower disks are stacked with a 90° rotation, forming uniformly staggered mass-transfer channels. The open area ratio is 9–12%; the small holes serve both for liquid redistribution and boundary-layer disturbance, enhancing gas-liquid contact.

  1. Core Advantages
  2. High specific surface area + high-efficiency mass transfer:The specific surface area of 250 m²/m³ is much higher than that of 125Y (125 m²/m³). Each meter of packing can provide 2–3 theoretical plates, and the separation efficiency is 2–3 times that of traditional random packing (Pall rings, Raschig rings). It can reduce tower height and equipment size, lowering capital construction and footprint costs. Under vacuum/atmospheric distillation conditions, gas-liquid contact is uniform, without channeling or wall flow, and separation purity is significantly improved.
  3. Balanced throughput and pressure drop:A high void fraction of 97% ensures high throughput, with an F-factor of 2.6, making it suitable for medium- and large-scale processing capacities. The pressure drop is only 1.5–2×10⁻⁴ MPa/m, far lower than that of high-specific-surface-area models (such as 350Y and 500Y), saving energy and reducing consumption. It is especially suitable for vacuum systems and long-cycle operating units.
  4. Strong fouling resistance and high durability:Compared with wire gauze corrugated packing, the perforated-plate structure is less prone to clogging and can withstand complex materials containing trace solids, high boilers, and easy coking. The metal material has high mechanical strength and resistance to acid and alkali corrosion. It does not deform or detach during long-term operation, has a long maintenance cycle, and reduces shutdown costs.
  5. Flexible customization and easy installation:It can be customized into whole-disk or segmented structures according to tower diameter, adapting to flange-connected towers and large-diameter manhole installation towers. The standardized modular design enables rapid on-site assembly and shortens project schedules.

250Y Metal Perforated-Plate Corrugated Packing

III. Typical Application Scenarios

  1. Petroleum chemical industry:atmospheric and vacuum distillation towers, aromatics distillation towers, ethylene/propylene absorption and desorption towers;
  2. Coal chemical industry:methanol distillation towers, syngas purification towers, coal tar separation towers;
  3. Fine chemical industry:solvent recovery, organic acid/alcohol separation, fragrance purification;

4. Dehydration, desulfurization, and carbon dioxide recovery.

  1. Selection and Service Notes

250Y metal perforated-plate corrugated packing, with its large specific surface area and high efficiency, is preferentially used in working conditions that require separation efficiency, processing capacity, and pressure drop simultaneously. When containing more impurities, it is recommended to equip a high-efficiency liquid distributor. The material should be determined according to the corrosiveness of the medium and temperature and pressure conditions (e.g., 316L or titanium for strong corrosion). One-stop services, including packing design, tower internals matching, and installation guidance can be provided to ensure that the packing performance is fully utilized.

Featured Blog

Get a quote

Tell me what you need