Liquid-vapor seperating device Mist Eliminator

Product Categories

Featured products

high vapor capacity and efficiency plastic beta ring

Plastic Beta ring was invented by Koch-glitsch. Based on the analysis of its structure, it has not only attract cascade mini ring’s low aspect ratio’s advantage, but also increase inner circle in the packing’s middle position. Therefore, plastic Beta ring is an excellent tower packingIn addition, Beta ring’s inner arc tabs will increase uninterrupted flows of gas and liquid while providing additional drip points to enhance liquid film surface renewal for improved mass and heat transfer.The variation in the length of the internal tabs ensures high efficiency and optimal distribution. Open structure and preferred vertical orientation inhibits fouling by allowing solids to be more easily flushed through the bed by the liquid.

High Temperature Resistance Chemical Random Tower Packing Ceramic Pall Ring

Ceramic pall ring is a type of classical random packing, which is developed from the Raschig ring. Commonly, there are two layers of windows opened along its cylinder wall. Each layer has five ligules bending inward the axes of the ring, which is similar to the metallic pall ring and plastic. But the layer and quantity of ligules may different according to the height and diameter variation.

ceramic petal ring for support media

It is an ideal support media.Owing to its unique structure enables an upper support layer with a typical diameter of 11.5 mm to effectively retain a bed of 1.6 mm catalyst without any migration into the support layer. This eliminates the need for micro-sized spherical support balls, reduces the number of support layers needed, reduces pressure drop and increases the space available for catalyst or adsorbent in the process reactor. In addition, Wave type shape ensure sufficient gaps between the packings to promote air’s freedom flow. Also overcome packig bed’s unevenly heat destribution phenomenon happening.

Plastic PP PVC PE PVDF PTFE CPVC Pall Ring for Distillation Column Packing

CPVC pall ring is greatly improved on the raschig ring. Although the outer diameter of the ring is equal to the height, two rows of Windows with internal extensor tongues are opened on the wall of the ring, and there are 5 tongues in each layer of window holes. This structure improves the gas-liquid distribution and makes full use of the inner surface of the ring. Compared with raschig ring, the capacity can be more than 50% larger, and the pressure can be reduced by half; It is usually made of metal, plastic or ceramic.

IMTP Ring SADDLE Ring Metal Packing

It is was invented by American Norton in 1978, which is a new type random packing.In Domestic market, it also called Intalox Metal saddle ring. In the 70s ending, we also invented two similar products. One is Metal rectangular saddle ring. Other is Metal Double arc ring./IMTP Ring SADDLE Ring Metal PACKING METAL 410IMTP Ring SADDLE Ring Metal PACKING METAL 410 Two side’s turnup increase packing’s mechanical strength and stiffness. Meanwhile, the stamping annular ring also increase packing’s comprehensive strength

Ceramic Cross-partition ring for packing support

Ceramic Cross-partition ring deign’s purpose is increase packing surface area to improve mass transfer effieiceny..Due to ceramic cross-partition ring belong to regular acid-resistant pickings for distillation and rectification columns.it will increase Cross shape septum in the ring’s inside. This design is not only enlarge packing surface area, but also increase its Compressive strength they are put (stacked) in packing layer position of the column. Additionally, large void ratio is rarely to cause channeling and Wall Flow Phenomenon happening, it is usally regard as tower bottom packing support layer.

Short Description:

It is is a device often fitted to vapor liquid separator vessels to enhance the removal of liquid droplets entrained in a vapor stream.It is made out of aluminum, galvanized steel and stainless steel materials. When desulfurized flue gas passing through Metal Mist Eliminator at a certain speed, flue gas will be quickly change movement way. Due to the inertia and centrifugal’s driven, droplet collides with Vane and gather to form water flow. Finally, when droplet forms bigger ones,It will fall down. The most common process design for Mist eliminator is in a vertical gas flow, but it is also possible to install Mist Eliminator in the horizontal gas flow. The choice of vanes and design is influenced by the system pressure loss, the cleanability of the mist eliminator and the risk off clogging.The mist eliminator system consists of the mist eliminator body and a flushing system. Generally, it is composed of two-level demister body with different specifications, flushing water pipes, nozzles, supporting frames, supporting beams and related connections, fixing parts, and sealing parts.

Product Detail

Feature

1: High defogging efficiency(Under the formal operation, The droplet concentration is less than 75mg/Nm3)

2: The system pressure drop lower than 120pa under 100% flue gas load

3: Vane is working properly under 0.3Mpa water pressure

Feature

1: mainly used for gas-liquid separation. It can also be an air filter for gas separation.

2: Also be used as a buffer for various meters in the meter industry, and an electronic shield to prevent electric wave interference.

Mist Eliminator

Liquid-vapor seperating device Mist Eliminator

Short Description:

Product Detail

Feature

Feature

Parameter table

Tell me what you need

Related Products

Dixon Ring Laboratory Column Packing Rings 2×2 3×3 6×6 9x9mm Made of SS304 316L Metal Wire Mesh

Metal Wire Triangular/Fenske Spiral for Lab Column Packing

Outstanding High Quality Structured Packing Support Grid

Quicklinks

Products

Terms and Conditions

Get in touch

Home

Product

Contact

WhatsApp

Tell me what you need