Lower initial design cost and operating cost:/Plastic Q Pack
The height of filler is reduced, the unit mass transfer efficiency is high, and the height of filler required to achieve the same efficiency is reduced.
Reduce the initial design cost, increase the flow rate of the empty tower to 2.5 – 3m/s, reduce the tower diameter, and save raw materials
The demisting layer is reduced, the tower diameter is small, the demisting layer is directly reduced, and the required equipment investment is reduced:
The electricity cost is saved and the porosity is high, so the pressure drop is only 100pa/m at 2.5m/s flow rate, greatly reducing the operation cost, saving water and money, reducing the spray water volume, which can reduce the pump selection, operation cost and initial design cost.
More stable and durable: column octagonal structure and high porosity make the product 360 ° free of dead angle, with better anti scaling and anti blocking characteristics, reducing cleaning frequency and extending service life.
Plastic Q Pack During the expansion and reconstruction of the old tower, it is only necessary to replace the packing, which can increase the waste gas treatment capacity by 30-50% while ensuring the removal efficiency, and reduce the pressure drop by more than 50%, saving the operating cost.
[email protected];/Jackie/ 86 18507999558
