The VOCs waste gas treatment project uses teller ring R-1 and K-2 models, which have high porosity and are not easily blocked. They have high flux and low resistance, and there is a lot of stagnant liquid in the gaps, resulting in longer liquid residence time in the tower and increased gas-liquid contact time, significantly improving efficiency. The structural characteristics of it make the pressure drop of the packing very small, which can achieve energy-saving goals. It is not only corrosion-resistant, but also has good strength. Due to its lightweight material, it is also easy to install. The idea of this packing is to prevent any dead corners in the flow of liquid downstream and to maximize the effective area of the packing. Due to the presence of many curved branches and junctions, the liquid can be evenly distributed in the packing layer. The main materials of plastic flower wreath filling are polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyethylene (CPVC)、 Made of materials such as polyvinylidene fluoride (PVDF) and ETFE.

DN78 Teller Ring K2

The performance of DN78 teller ring: Teller ring K2 packing has the advantages of high porosity, low clogging, high flux, and low resistance.

The structure of DN78 teller ring: The Trarad ring K2 packing is composed of many circular rings wound together. Due to the high liquid holding capacity at the gaps of the thorny flower garland, the liquid residence time in the tower can be longer, thereby increasing the contact time between gas and liquid and improving the mass transfer efficiency of the packing.

The advantages of DN78 teller ring include high porosity, low pressure drop and mass transfer unit height, high flooding point, sufficient gas-liquid contact, low specific gravity, and high mass transfer efficiency.

The application range of DN78 teller ring: mostly used for gas washing, purification tower, etc.