liquid-vapor contacting component Bubble cap

Product Categories

Featured products

Factory Price Plastic hiflow Ring for Random Packing

Hiflow Ring is a 3rd generation high performance tower packing which provides an optimal design of high mechanical stability, void fraction and superior mass transfer performance.The grid structure guarantee its opening pore ratio exceeds 50% and Bed void fraction is higher than same size’s pall ring. Plastic hiflow Ring In addition, large fluid flux guarantee its pressure drop per square meter lower 45% than pall ring.Vertical bar staggered distribution and reinforced horizontal stripe largely improve its rigidity and strength.

High gas-liquid contacting packing Metal cascade Mini ring

When liquid flows downward packing’s surface to become liquid droplet,these droplet fall down the next packing’s surface to form interflow.After that, when liquid droplet contacts with the rising gas, material was be transferred.Gas & liquid’s contacting basically principle is collision type surface’s continuously update.Metal cascade mini ring’s two end’s round turnup and large wall’s area will promote liquid’s continuously interflow and shunt to achieve surface’s update. Therefore, it can be regarded as one high gas-liquid contacting efficiency metal random packing.

Water body covering medium Plastic Hollow ball

This ball was made by blow molding technology. So this ball has not any cracks.Traditionally, this ball is used in water treatment. When millions of Plastic Hollow ball onto the surface of a liquid, the balls automatically form a liquid covering surface. This covering surface provides an extremely effective barrier and significantly reduces the mass and heat transfer mechanisms operating between the liquid and surrounding environment.At present, according to scientists’ continuous development and innovation, this balls application will become more wider. Such as prevent birds from landing and nesting on the liquid’s surface and around place,use as a check-valve ball in flow control applications, shock absorption in building field and so on.

Outstanding High Quality Structured Packing Support Grid

Structured Packing Support Grid is a vital component used in distillation columns and separation towers to support structured packing materials. It improves stability, fluid distribution, and separation efficiency, making it ideal for chemical plants and refineries.

SS304 SS316 Distillation Column Metal Perforate Corrugated Plate Tower Metal Structured Packing

Metal Structured Packing was invented by Swiss Sulzer in 1977. They called Mellapak. It is formed from thin corrugated metallic plates, which plates has 4 mm pore, and uniform geometry arranged and neatly piled in the tower. Plate pore promotes liquid’s Radial dispersion and horizontal mixing.

Common random packing Plastic pall ring

Plastic Pall ring birth is aim to overcome Raschig rings wall flow, Internal channels are not easy to wet,Long gas return path and so on. Since birth, Plastic Pall ring was recognized the common random packing in mass transfer field. Widely apply in absorption, scrubbing and stripping field.Under the same operation condition, Plastic Pall ring’s air velocity flux is 50% larger than the Raschig ring, and mass transfer efficiency is 30% higher.By minimizing the number of contours and crevices that can cause liquid hold-up and potential entertainment, Plastic Pall ring’s opened cylinder walls and inward bent protrusions allow greater capacity and lower pressure drop than standard cylindrical rings.

Short Description:

The structure of the bubble cap tray is mainly composed of a blister (gas-liquid contact element), a gas riser, an overflow weir, a downcomer and a tray.The bubble tray is provided with a plurality of round holes on the tray plate, and each hole is welded with a short tube called a riser tube, and the tube is covered with a “hat” called a blister, and a plurality of strips are formed around the blister. Hole, during operation, the liquid flows from the upper tray through the downcomer into the lower tray, then flows laterally through the tray plate and flows into the next tray; the gas rises from the lower tray into the riser tube and passes through the annular passage. The strip holes of the blister flow into the liquid layer between the blister.

Product Detail

Technical Parameter

Material	Plastic			Metal
Diameter/mm	80	100	150	80	100	150
Wall Thickness/mm	2	3	3	1.5	1.5	1.5
Riser Diameter/mm	57	70	108	57	70	108
Riser Thickness/mm	3.5	4	4	2.75	3	4
Total Height/mm	95	105	107	95	105	107
Riser Height/mm	57	62	64	57	62	64
Cap height/mm	65	75	73	65	75	73
Height from Cap top to gap bottom/mm	40	45	47	40	45	47
	35	42	45	35	42	45
	30	38	42	30	38	42
Gap Height/mm	20	25	35	20	25	35
	25	28	38	25	28	38
	30	32	42	30	32	42
Gap Width	4	5	13.5	4	5	13.5
Gap Quantity	30	32	28	30	32	28
Distance of two caps mm	8.35	9.84	17.7	8.35	9.84	17.7

Typical Applcation

1: Form a bubbling layer to provide a large number of interfaces for the heat and mass transfer of the gas-liquid two-phase

Feature

1: Leakage is not easy to occur

2: Better operating flexibility

3: Constant, high board efficiency

4: Not easy to block

5: Strong adaptability of materials

component Bubble cap

liquid-vapor contacting component Bubble cap

Short Description:

Product Detail

Technical Parameter

Typical Applcation

Feature

Parameter table

Tell me what you need

Related Products

Dixon Ring Laboratory Column Packing Rings 2×2 3×3 6×6 9x9mm Made of SS304 316L Metal Wire Mesh

Metal Wire Triangular/Fenske Spiral for Lab Column Packing

Outstanding High Quality Structured Packing Support Grid

Quicklinks

Products

Terms and Conditions

Get in touch

Home

Product

Contact

WhatsApp

Tell me what you need