Product Categories

Metal Random Packing

Ceramic Random Packing

Structured Packing

Tower Internals

Water treatment filter

Ceramic Ball

Common random packing Plastic pall ring

Plastic Pall ring birth is aim to overcome Raschig rings wall flow, Internal channels are not easy to wet,Long gas return path and so on. Since birth, Plastic Pall ring was recognized the common random packing in mass transfer field. Widely apply in absorption, scrubbing and stripping field.Under the same operation condition, Plastic Pall ring’s air velocity flux is 50% larger than the Raschig ring, and mass transfer efficiency is 30% higher.By minimizing the number of contours and crevices that can cause liquid hold-up and potential entertainment, Plastic Pall ring’s opened cylinder walls and inward bent protrusions allow greater capacity and lower pressure drop than standard cylindrical rings.

high vapor capacity and efficiency plastic beta ring

Plastic Beta ring was invented by Koch-glitsch. Based on the analysis of its structure, it has not only attract cascade mini ring’s low aspect ratio’s advantage, but also increase inner circle in the packing’s middle position. Therefore, plastic Beta ring is an excellent tower packingIn addition, Beta ring’s inner arc tabs will increase uninterrupted flows of gas and liquid while providing additional drip points to enhance liquid film surface renewal for improved mass and heat transfer.The variation in the length of the internal tabs ensures high efficiency and optimal distribution. Open structure and preferred vertical orientation inhibits fouling by allowing solids to be more easily flushed through the bed by the liquid.

Ceramic Cross-partition ring for packing support

Ceramic Cross-partition ring deign’s purpose is increase packing surface area to improve mass transfer effieiceny..Due to ceramic cross-partition ring belong to regular acid-resistant pickings for distillation and rectification columns.it will increase Cross shape septum in the ring’s inside. This design is not only enlarge packing surface area, but also increase its Compressive strength they are put (stacked) in packing layer position of the column. Additionally, large void ratio is rarely to cause channeling and Wall Flow Phenomenon happening, it is usally regard as tower bottom packing support layer.

Light Porcelain Ceramic Structured Packing for Washing Tower

Light Porcelain Ceramic Structured Packing the performance of all-porcelain pakcing is much better than that of light porcelain packing. Therefore, On the issue of choosing light porcelain or all porcelain packing, please consider the actual operation enviroment carefully. Generally speaking, Both of them are widely used in the processes of coking desulfurization,washing benzene,naphthalene and ammonia sulfuric acid drying,chemical fertilizer hot water saturation tower,electric power plant tricking water colling tower, absorbing tower and on. Light Porcelain Ceramic Structured Packing

Packing and catalyst support grid

Support plate/Support grid must meet the following requirements:1. High degree of permeability for both gas and liquid.2. High degree of stability with low own weight.3. Availability in various types of material to suit different corrosion levels.4. Easy installation in the column.

Plastic Floating Water Pool Ball, Liquid Surface Covering Ball with Edges for water treatment

Covering Ball is injection process. Other is foaming process. Owing to Injected cover ball’s weight is very light, it is very easy to wash way by strong water flow. Therefore, our company’s technical staffs have placed one solid steel ball inside the sphere. This change has not only increase the stability of the center of gravity, but also avoid of be blown way by strong wind. The overlapped edge will short Floating cover’s void fraction so as to reduce heat loss and evaporation rate.Finally. The combination of aerators and mixers with Floating cover leads to improved biological treatment performance and consistent high-quality effluent.As for Foamed Liquid surface cover ball, due to the processing is foaming technology, it is very easy to soften under long time exposure.

Orifice & Trough-Type Liquid Distributors

In order to ensure liquid’s evenly spread on the surface of the packing and improve packing’s use efficiency, Liquid distributor was born. Each distributor consists of a centrally arranged main trough with attached side troughs.Central and side trough form a communicating system that equalize liquid level gradients within the distributor most efficiently. According to different processing demand, Liquid distributor will divide to two types. One is Gravity type. Other is Pressure type. Such as Weir Type distributor, Punching tube distributor, Disk type distributor and so on is depend on two types.Generally,through Liquid distributor’s evenly spread against liquid, it will largely improve packing’s separation efficiency. However, due to Liquid distributor is belong to customized product,we can design and manufacturer it against different requirement.

Ideal biological filter media opening bio ball

Bio ball have a reputation for being a nitrate factory,where there is no room for any anaerobic nitrate bacteria growing.but it is like as a home of for those bacteria growring,such as Nitrifying bacteria. It aim to assist in the population growth of beneficial bacteria. Owing to this ball’s material is plastic,so it is very easy to float on water surface. Unique guilding flow slot & plate will promote liquid evenly distribution. Bio-sponge inside provide more surface area for benefical bacteria growth.

submerged aerated fixed film medium Oxybee

It was designed by Eloy Water,which shape like honeycomb. It has not only tube settler’a feature, but also provide enough growing space for bacteria.When the waste water passing Oxybee’s honeycomb channel, bacteria will stay on the oxybee surface and inform thin biofilm. Those bacteria will devour organic matter and form a long-term stable biological chain.Each oxybee’s High surface area and void ratio allows a sucessful biofilm development without clogging. In other words, each oxybee is like an indepent Biocirculation system. Therefore, it is proved the newest Biofilm carrier in Biological wastewater treatment.

Common random packing Plastic pall ring

high vapor capacity and efficiency plastic beta ring

Ceramic Cross-partition ring for packing support

Light Porcelain Ceramic Structured Packing for Washing Tower

Packing and catalyst support grid

Plastic Floating Water Pool Ball, Liquid Surface Covering Ball with Edges for water treatment

Orifice & Trough-Type Liquid Distributors

Ideal biological filter media opening bio ball

submerged aerated fixed film medium Oxybee

We Always Keep your Protected, Get Your Free Consultation Here.

Quicklinks

Products

Terms and Conditions

Get in touch

Home

Product

Contact

WhatsApp

Tell me what you need